Crank Brothers Candy Sl Pedals

I picked up a set to use for BMX racing and ended up using them for XC too. They were definitely priced right and offer tons of float. The float really helped when tackling tough terrain and switch backs on the XC bike. I talked my friend into a pair of these because he just had knee surgery and the ease of entry and exit is unbeatable.

I love these pedals and have used them for years on a couple without any problems at all. I read some others complain about them loosening after a year or two or becoming sloppy. Duh! Cleats wear out and need replaced, they are meant to last forever. The brass cleats need to be replaced after 500 miles or so to get that new pedal feel again. I have services my candy sl's once not because of a problem, just because I like to take things apart. So, they are serviceable and Crank Brothers offer a bearing service kit now.

Best thing about these pedals is you can just bolt them one and ride, no finicky adjustments of cleat or pedal tension required. So an A+ on ease of use.

The ultimate all-round pedal. The original egg beater is unquestionably lighter, but the extra platform offers so much more stability and an easy of use that I am willing to cope with. Not only do these pedals look cool, but I have used them in all conditions (ie. Mud, dirt, etc.) and I have had no issues clicking in. With one tap of your shoe, the mechanism is designed to grip the cleat and allow you to keep rolling. These things rule, and I have used a lot of different pedals in the past. These win.

I have these on my mountain bike. Great pedal! No issues in the mud or when you take that header down the hill.

I have not had my pedals as long as the other reviewer, but I really like them so far. I'm a huge fan of the egg beater style and I even ride them on my road bikes. the platform design of this pedal is more conducive to the road than the standard egg beaters. Both are highly recommended for the trail though.

Crap pedal. Lightweight, simple, and reasonably price, but not worth even that cost. Smack a rock with the bottom of the pedal and the springs release. The design clears mud, but, over time, the grip on the cleat grows weaker and weaker. My advice, simply don't buy 'em.

I really like the design of these pedals, but they do not seem to be holding up to the abuse of mtb. Next summer, I will be my 3rd season riding them, so we will see. But have 2 seasons, the build and cleat stay seem to be diminishing. I will update as the life of the pedal moves on. Paint is flaking off the pedal and clip in is getting weak are my two complaints.

these are pretty light pedals -150 gms for each pedal - and they have a neat cleat/adapter system for road shoes but i needed a lot of float for my knees and i was fooled by the float description- the release angle is 20 degrees-the float is only 6 degrees. would have tried them more but i couldn't get past the float issue. good price on bonktown- a real steal for a light pedal

I have 4 bikes. I have 4 sets of Candy SL's. I ride them both MTB and road bike. They are the best pedal made, and the SL's are worth the small premium over the C's.

I bought these 8 months ago to replace my finicky SPD's. No comparisons. Easy in and easy out, yet they pull perfectly with no shifting at all. I've smacked these into who knows how many rocks, and it has yet to affect their performance one bit. I plan on getting a pair for my wife and another for my other bike.

I had one pair of Candy SL's that broke and were a little under two years old (within Manufacturer Warranty) but Crankbrothers took care of them no questions asked.

IMO, these are not great pedals. Light and cheap, yes, but not durable. Mine have loosened up to the point that my cleat feels really loose in the pedal, and this is after less than a year of use. Also, if you smack a rock with the bottom of the pedal, it will often release your foot. I just replaced these with my heavier, but tried and true set Time A.T.A.C. Alium pedal with individual springs for each side.

I purchased these pedals a while back, but hadn't been able to use them until these past couple of weekends. This is my first experience with clipless... I didn't make the switch until now because of the overall cost associated with them (pedals and shoes, repairs, replacements), but my new employer reimburses for wellness expenses, so I thought I would give it a shot. With a pair of Sidi Bullet 2 mtb shoes, Ive gone about 25hrs on fairly rough terrain and they seem to be holding up fairly well. However, no matter what you buy, they're always going to be more susceptible to the trail than the solid steel beasts that come standard on all mountain bikes. At times they can feel a little loose, but this may just be my inexperience in being attached to the bike. I could see the composite platforms degrading quickly¦ the stainless steel kick plates seem thin and couldn be attached by anything more than some glue (no visible bolts or screws), so I wouldnt be surprised to find pieces missing after a while. I only ride a couple of times a month, so they'll probably last me more than long enough, but if I do have to replace them every 12-16 months, it would be worth the hassle of waiting for a reimbursement.

This is one of the best pedals on the market. I had my first pair for five years and had no problems. That pair still works fine, but they got a warn and creaky, so I replaced them.

Here's a link to my detailed review http://www.nationaloutdoors.net/gearreview/crank-brothers-candy-pedals-review

Great pedal for commuting or general biking use. Like regular Egg Beaters they are easy in and out with little or no maintenance needed.

These took a few rides for me to break in, but I have now been riding them for 6 mos with no issues. I have ridden spds egg beaters and candy c, and off all these the Candy SL have the best performance combination. Easy to clip in, easy to get out, hold in the clips well on tough terrain, as well as hard pulls. As far as durablity at this point I would replace them every six months if I had too based on their performance so far.. But the ones I have are still in good shape, so ride on!

First pair of crank brother's pedals and I was stoked after the first ride. I've used SPDs for the past 7 years and decided to try something new this year after finally getting a new bike and new shoes. Much easier to get in and out of than I expected (just as easy as my old SPDs -i was always a little worried about not being able to change the spring tension, but it really doesn't matter), lighter than my old pedals, and feels solid on the downhill.

I am relatively new to clipless pedals and I am stoked on these pedals! I like the fact that the entry/release point can be dialed in which I take advantage of on varying terrain. They are not the lightest pair of clipless on the market, but they certainly do the job.